Fitting Guide

Ace Automotive

Before you get started:

1. Do not remove the original leather before installation. Our covers are designed to fit on top of the original steering wheel.
2. The double-sided tape is not necessary for the whole installation.
3. Make sure you can distinguish between the front and back of the cover, if you struggle feel free to contact us for assistance.
4. It is not necessarily required to remove or disassemble the steering wheel. You can fit your cover with the wheel still on!
5. Many video tutorials on YouTube can also assist you.

Thank you for choosing Ace Automotive

If you any issues feel free to contact us and we will be sure to try
and resolve your issue as best as we can.

Step 1:

Place the cover on the steering wheel and check that the cover fits correctly. If it does not fit be sure to get in touch with us right away.

Step 2:

Stick the double-sided tape where necessary. This can be stuck directly to the cover or your wheel.
Note: Do not stick the tape to the very edge of the cover.

Step 3:

Adjust the position of the cover to get the perfect fitment. Align the stitch pattern to the factory stitching for the best results.

Step 4:

Double check again, to ensure the cover is in the right position. This is important as it can affect the rest of the installation process.

Step 5:

Tear off the tape and secure the cover down in position.

Step 6:

Tuck the extra material into the steering wheel, using the plastic trim tool provided.
Note: Fold the leather when tucking to avoid damaging i product.

Step 7:

Time to stitch the wheel cover together.
Note: You should allow the whole thread to go through each knot, or you will be at risk of breaking the thread when sewing the cover together tightly.

Step 8:

Tie a knot at the end of each section and you have finished the installation.

Shop Now